PIPECONX - Universal Pipe Connectors


	How To Install Clay to Clay Clay to Plastic or Cast Iron Clay to Asbestos Cement Fibre or Ductile Iron Concrete to Concrete Concrete to Plastic or Cast Iron Non-Shear Couplings Asbestos Cement or Ductile Iron to Cast Iron or Plastic Plastic or Cast Iron to Plastic or Cast Iron


STANDARD IN HOUSE CONNECTION

Loosen the stainless steel clamps, but DO NOT REMOVE the clamps from the coupling.	Slide the PIPECONX Coupling over the ends of the two pipes to be joined.	Tighten the stainless steel clamps to 60 inch-lbs. of torque.	Support the joint and pressure test for leaks before concealing.

STANDARD IN GROUND CONNECTION

Loosen the stainless steel clamps, but DO NOT REMOVE the clamps from the coupling.	Slide the PIPECONX Coupling over the ends of the two pipes to be joined.	Tighten the stainless steel clamps to 60 inch-lbs. of torque.	Pressure test before covering joint. Be sure to bed and backfill properly.

NOTE: Maximum test pressure is 4.3 psi.